Safety Precautions to Follow While Using Machine

Safety precautions

Safety precautions needs to be followed if your are working in a factory or production plant. Every machine has the presence of some potential dangers that must be handled properly. One should be alert because as machines are becoming higher tech-oriented, the risk of electric shots also increases. So it is important to keep updated with the advancement of the industry and how to protect ourselves from the dangers of machines.

Are you into a technical-related business? Then you need to ensure that your staff is properly familiar with all the safety rules. Arrange training sessions to update and reinforce them to follow the appropriate tactics.

In this blog, you will find the top machine safety rules to follow so find below:

Safety Precautions to Start Operating Machinery Once the Safeguard Is Properly Installed

Some several rules and regulations govern the safety points and the proper safeguard of installation of machine tools manufacturers. It is the responsibility of the business owner that all the employees follow the safety precautions.

The machine operator should identify all the safeguard points of the machine and the problems if they exist in any part. The training program should be specially designed to emphasize all the requirements of legal safeguard.

Do Not Remove The Machine Safeguard

Feels good when the machine operator removes an annoying safeguard or makes an attempt to bypass it. It is considered as one of the most dangerous things to try to get around them. It prevents the employees from getting on with the job. So do not remove any safeguard point because there is a reason behind each point.

Do Not Make Use Of Damaged And Unauthorized Machine

Have you bought a machine that installed safeguards improperly, then do not use that machine. Because it is possible that it does not comply with existing regulations. So the machine should not be used in such situations where the safeguards are not in an authorized condition.

Report The Machine Safeguard Properly Immediately After Discovering

On observing any mishap in any machine then do not waste time not reporting them. So immediately report the complaint in case of any damage or failure to the supervisor. That is how the problem can be resolved on time. Do not get involved in the regular operations until the problem is resolved.

Make Sure To Lubricate Machine Parts Without Removing The Safeguard

Some machines can lubricate without removing the safeguards. With the usage of oil reservoirs that may be located outside the guard. If you do not find access to the machine then you need to switch off and lock on the machine before guards are removed.

Do Not Remove Machine Safeguard Until The Equipment Is Tagged Out Or Lockout

If you are involved in the activity of removing the safeguard for any reason like replacement or maintenance then you must do it after the safeguard is tagged out, lockout, or isolated of the equipment. The rule applies to all kinds of machines whether reactive or scheduled.

Do Not Create Safety Hazards Like New Pinch Points

Several hazardous pinch points are likely to be found in the different types of gear and roller assemblies, spindles, drive drums, flywheels, and couplings. Convex curves on conveyor belts, junctions, terminal, locations near skirt plates, tracking, and feed hoppers.

Anything dropped into the machine intentionally or unintentionally then it can create a new pinch point. It can cause damage to the equipment itself and also its operator. Make sure that you do not walk away from the machine until the entire parts have stopped moving.

 Make Sure To Use The Proper Protective Clothing And Avoid Jeweler

The pinch point can also be defined as where the entire body of the person is at risk of being caught by the machinery. To prevent such risks, you need to wear protective clothing and avoid jewelry or lose clothing that can dangle anywhere nearby machines.

It is recommended by the machine tools manufacturers that such objects can be caught by the moving parts of the machines that can cause safety hazards. Therefore it is essential to have properly trained employees who should wear the PPE in the workplace including safety glasses, gloves, necessary masks, hats, boots, and aprons.